Compare
Haibike AllMtn 10 Full Sus Electric Mountain Bike 2022/23, Mix Wheel, Yamaha PW-X3 – Stealth Black
The AllMtn CF10 differs from the CF SE and CF11 in that it has a new, Yamaha PW-X3 electric drive unit and control system. With its 720Wh in-tube battery and optional range extender, this is a beast that will keep on chewing up the miles.
Though it has a 720Wh battery and a PW-X3 motor with a beefy 85Nm of torque, the AllMtn CF10 can come with an MRS range extender unlike its bigger and more expensive brothers. If a big day in the hills from dawn to dusk in midsummer is on the cars, this could well be your best of choice.
For agility yet comfort, the e-MTB comes with a 29” front and a 27.5” rear wheel with Maxxis Minion DHF II and DHR II tyres for good grip even on those slippy climbs.
A 12-speed Shimano Deore XT M8100 Shadow Plus pedal drivetrain will give you all the ratios you need for uphill and down, and Shimano Deore XT M8100 4-piston disc brakes are among the best on the eMTB market.
160mm, Foxx forks and dampers round off a great all-round eMTB that will handle XC and trails with ease, agility and comfort.
Yamaha PW-X3
High Output
Through a complete drive unit redesign, PW-X3 delivers 85Nm of motor torque throughout a wide cadence range. The PW-X3 design is committed to motor performance, keeping the high torque output figures despite the drastic size and weight reduction.
Natural, Agile Response
Right from the beginning, every PW-X series drive unit has featured the 128mm ISIS interface bottom bracket axle that gives the best Q-factor in any e-bike system. Yamaha Motor’s new PW-X3 continues with this idealized layout, making it especially attractive to expert riders. Exclusive mechanical components and control program realize an unparalleled level of maneuverability. The reduced backlash of the ratchet mechanism and lightweight designs for major moving parts, such as the axle shaft and reduction gear, contributes to a quicker, more direct response to pedaling. Fundamental design choices create the Yamaha distinctive feature of providing instant support with full torque immediately after pressure is applied to the pedal, not after certain crank turn.
Compact & Lightweight
The new PW-X3 is approximately 20% smaller and 10% lighter than the PW-X2 model. Its ultra-compact dimensions offer e-bike manufacturers greater freedom to develop nice-looking bikes aiming for ideal frame geometry and suspension kinematics, as well as increased ground clearance.
Automatic Support Mode for E-MTB Ride
The PW-X3's exclusively tuned Automatic Support Mode delivers optimal assist in settings ranging from trail riding to racing by choosing from the bike's three riding modes -Eco, Standard, and High- as conditions demand. The system reduces assist on level roads but boosts power on steep inclines to offer fine-grained assist feel that makes it seem like it's reading the rider's mind.
Key Features:
- Frame: Haibike AllMtn, Aluminium
- Motor: Yamaha PW-X3 250w, 85Nm
- Battery: Yamaha InTube 720Wh
- Frame Shock: FOX Float X Factory EVOL LV, air
- Suspension Fork: FOX 38 Factory Kashima, air, 160mm
- Gearing: Shimano Deore XT M8100 Shadow Plus, 12-speed
- Brakes: Shimano Deore XT M8100 Hydraulic Disc, 203mm Rotors
- Display: Yamaha Interface – X
- Wheels: Mavic E-Deemax, 27.5"/29"
- Front Tyre: Maxxis, Minion DHF II, 65-622, 29 x 2.5"
- Rear Tyre: Maxxis, Minion DHR II, 71-584, 27.5 x 2.8"
- Battery Range: Yamaha InTube 720Wh – 40-140 Power Assisted Miles*
*As provided by Haibike UK. This will vary depending on weight of user, terrain and mode of pedal assistance used
