Cube Stereo Hybrid 160 Action Team 500 Kiox FS Electric MTB 2019 - 8 Speed, 27.5" Wheel
Adaptable X12 Hanger
We optimized our new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. We can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.
Frame Safe System
To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one.
Advanced Hydroforming
The new STEREO , FRITZZ and HANZZ models are built using Advanced Hydroforming. Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased.
Agile Trail Geometry
The Agile Trail Geometry carries over the Agile Ride Geometry’s benefits but with more focus on aggressive trail use. This can be achieved through a more compact frame construction with an even lower top tube and improved standover height. The result is more freedom of movement on the bike for the rider and a lower centre of gravity which guarantees agile handling and more riding fun.
Efficient Trail Control
Our Efficient Trail Control series works so that everyone can have more fun on the trail. With 27.5 and 29er wheel options our frames cover the widest range of riding on every terrain you can imagine. The low leverage ratio and linear rate curve makes the bike very sensitive, avoids bobbing and offers full usable travel all the time. Steep seat tube angles and slack head tube angles make these dream machines ready for action on the descent where you can use the full amount of travel to be on the safe side.
Boost148
Boost 148mm technology provides precise handling, on every trail, in every situation. The hub flange moves 3mm towards the outside on both sides. It increases the stiffness of a 27.5? wheel by 14% and, for a 29er wheel, by 21%. The reason is the spoke’s wider support in comparison to the 142mm hubs used previously.
FSP4Link
The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this – CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, we obtain the finest riding qualities for our full suspension bikes both uphill and downhill. This fact is proven by many top test results in leading magazines over the last few years.
Trail Motion Rocker
The Trail Motion Rocker features optimized leverage ratios for every bike and intended use, giving fast reacting yet stable suspension in every situation. The computer-designed one piece rocker construction gives maximum stiffness for the best suspension performance while still being extremely lightweight.
Integrated Cable Routing
Internally routed cables offer many advantages. Cables are protected from dirt for longer life, weight is saved thanks to the absence of external housing and the bike has a clean, sleek appearance.
Tapered Steerer
This steerer tube design is stiffer than a conventional straight steerer and yields a more secure ride feel even in difficult terrain. Minimal flex at the front of the frame means the greatest possible steering precision. With the larger steerer, the forks become more rigid. At the same time weight is saved due to the absence of bearing shells as the lower bearing is fully integrated into the head tube. On all of our CUBE carbon models the upper bearing shells are also directly in the frame, so that once more a few grams are saved and the energy transfer is very direct.
Key Features:
- Frame: Aluminium Superlite, Gravity Casting, Triple Butted, Efficient Trail Control 4-Link, Agile Trail Geometry, Boost 148, Tuned Drive Position, AXH, Full Integrated Battery
- Fork: Fox 36 Float Factory FIT4, 3-Position w/Low Speed Compression Adjust, Tapered, 15x110mm, 170mm, Kashima Coated
- Gears: Sram EX1, 8-Speed
- Brake: Shimano Saint BR-M820, Hydr. Disc Brake (203/203)
- Front Tyre: Schwalbe Magic Mary 2.60, Addix Soft, Tubeless Easy, Super Gravity
- Rear Tyre: Schwalbe Nobby Nic 2.60, Addix Speedgrip, Tubeless Easy, Super Gravity
- Battery: Bosch PowerTube 500Wh, 30-140 Power Assisted Miles*
- Drive Unit: Bosch Drive Unit Performance CX (75Nm) Cruise (250Watt)
- Display: Bosch Kiox
*This will vary depending on weight of user, terrain and mode of pedal assistance used.
Specifications:
- Frame: Aluminium Superlite, Gravity Casting, Triple Butted, Efficient Trail Control 4-Link, Agile Trail Geometry, Boost 148, Tuned Drive Position, AXH, Full Integrated Battery
- Fork: Fox 36 Float Factory FIT4, 3-Position w/Low Speed Compression Adjust, Tapered, 15x110mm, 170mm, Kashima Coated
- Headset: FSA 1.5E ZS, Top Zero-Stack 1 1/8" (OD 44mm), Bottom Zero-Stack 1 1/2" (OD 56mm)
- Stem: Race Face Turbine, 35mm
- Handlebar: Race Face SixC 35, 820mm
- Grips: CUBE Race Grip 31mm, 1-Clamp
- Rear Derailleur: Sram EX1, 8-Speed
- Shifters: Sram EX1 Trigger
- Brake System: Shimano Saint BR-M820, Hydr. Disc Brake (203/203)
- Crankset: Race Face Aeffect, 16T, 165mm
- Chain: Sram EX1
- Shock: Fox FLOAT DPX2 Factory EVOL, 200x57mm, Kashima Coated
- Cassette: Sram XG-899, 11-48T
- Wheelset: Newmen Evolution SL E.35, 28/28 Spokes, 15x110mm / 12x148mm, Tubeless Ready
- Front Tyre: Schwalbe Magic Mary 2.60, Addix Soft, Tubeless Easy, Super Gravity
- Rear Tyre: Schwalbe Nobby Nic 2.60, Addix Speedgrip, Tubeless Easy, Super Gravity
- Pedals: CUBE PP MTB
- Saddle: Natrual Fit Active Race
- Seat Post: Fox Transfer Factory 31.6mm, Kashima Coated (16": 359x100mm; 18": 409x125mm; 20", 22": 456x150mm)
- Seat Clamp: CUBE Screwlock, 34.9mm
- Battery: Bosch PowerTube 500
- Drive Unit: Bosch Drive Unit Performance CX (75Nm) Cruise (250Watt)
- Display: Bosch Kiox
- Shock Hardware: Top: 30x8mm, Bottom: 30x8mm
- Charger: Bosch 4A
- Frame Sizes: 16", 18", 20", 22"
- Colours: Grey/Orange/Blue
- Weight: 24.6kg
Battery Size | 500Wh |
Brake Type | Disc |
Colour | Blue Grey Orange |
Drive Type | Crank |
Frame Size | 16" 18" 20" 22" |
Frame Type | Action Team 500 Kiox |
Gears | 8 |
Gender | Men & Unisex |
Material | Alloy |
Motor | 250 |
Range | 30-140 |
Suspension | Full |
Type | Mountain Bike |
Weight | 24.6 |
Wheel Size | 27.5 |
Battery Specifications:
- Battery: Bosch PowerTube 500Wh, 30-140 Power Assisted Miles*
*This will vary depending on weight of user, terrain and mode of pedal assistance used
Extra Information:
- This Electric Bike will be SUPPLIED ASSEMBLED complete with charger and everything you see included.
- Upon arrival, simple attachment of the pedals and the straightening of the handlebar will be required.
Leave a Review for
Cube Stereo Hybrid 160 Action Team 500 Kiox FS Electric MTB 2019 - 8 Speed, 27.5" Wheel
To leave a review for a product you must be:
- logged into the site
- have bought the product at least once